AG-IIR003B Baby Incubator
AG-IIR003B Baby Incubator
Function
1. Microprocessor-based servo controlled temperature system
2. Control modes: Air mode and baby skin mode
3. Humidity control system
4. Set temperature, air temperature, baby skin temperature, humidity, timer and heating power are displayed separately by LED
5. Integral timer to record therapy time
6. Self-testing function, various failure alarms by audible and visual
7. Alarm function
Power failure, Over temperature, Temperature deviation, Fan failure, Temperature sensor failure, Low water level >37 temperature set function
8. Triple protection for over temperature with separate cut off device, more safety system
9. The inclination of the infant bed is adjustable
10. Single wall hood, 4 operating windows and 2 iris ports, 5 infusion seals
11. Independent locking device for front door RS232 connector, Oxygen inlet, 1 tray
| Power supply | AC110/220V 60/50Hz |
| Power input | 650VA |
| Operating condition | Environment temperature: 20°C ~ 30°C
Environment relative humidity: 30% ~ 75% Environment air velocity of flow <0.3m/s |
| Air temperature control range | 25°C~37°C, 37.1°C ~38°C |
| Skin temperature control range | 32°C~37°C, 37.1°C ~ 38C |
| Humidity display range | 0% ~99% |
| Humidity control range | 40% ~95% |
| Skin temperature sensor accuracy | ±0.3°C |
| Temperature fluctuation | ±0.5°C |
| Uniformity of mattress temperature | ≤0.8C |
| Warm-up time(from 25°C) | < 30min |
| Internal noise level | < 50dB(A) |
| Infant bed tilt angle | ±10° |
| Mattress size | 65cm(L)*37cm(W) |
| Trough capacity | 1000mL |
| Air filter | 0.5um |
Transport and storage
Package
Each unit is packed in two plywood cases(control unit and cabinet):112*66*98cm N.W.:80Kg,G.W.:110Kg
Hood:98*63* 74cm N.W.:15Kg,G.W.:30Kg
Transport and storage
Environment temperature:-10°C ~+70°C
Environment relative humidity：≤80%
Atmospheric Pressure：500 ~ 1060hpa
Standard configuration
Main body(including the Transparent hood,Control system,Infant bed,Water trough),1.V.pole,Mattress
Drawers, Castors, Tray, Oxygen inlet
No reviews found
