EGG Incubator NCHT-1056
NCHT-1056 EGG Incubator
Introduction
The new generation intelligent humiture egg incubator controller is a fully-intelligent microcomputer control system designed and developed for incubation industry and it applies the latest microelectronic technology and new type components. It applies the microcomputer chips to have strong anti-interference and high stable performance; the temperature sensor applies the high precision sensor to have high temperature collection precision and wide temperature range; this egg incubator applies high performance humidity sensor to high precision to effectively ensure the stableness and reliability. It has the design of user-friendly four screens for display including two screens displaying the temperature and humidity of incubator and other two screens displaying the egg turning times and incubation days by pressing the keys and displaying the preset temperature and humidity by pressing the keys. And six kinds of incubation modes for user-definition, chicken, duck, goose, pigeon and blackcock are available for selection.
Specification
Temperature display range | 0~99.9℃ |
Temperature measurement precision | ±0.1℃ |
Humidity display range | 0~99%RH |
Control release precision | ±3%RH |
Output lines | 6 lines (primary heating, auxiliary heating, exhaust (air exchange), turning left, turning right, humidifying) |
Output current | primary and auxiliary heating 30A, other output 10A |
Egg turning times | maximum 999 times |
Egg turning cycle | 0~999 minutes (default 90 minutes) |
Egg turning period | 0~999 seconds (default 180 seconds) |
Air exchange cycle | 0~999 minutes (default 120 minutes) |
Air exchange period | 0~999 seconds (default 15 seconds) |
Length of measuring line | about 1.5 meters |
Packing Size | 1090*800*1410mm |
III. Working conditions:
• Working voltage: AC 180V~240V,50HZ
• Relative humidity: less than 85%
• Ambient temperature:The incubation setting consists of automatic incubation and user-defined incubation.
IV. Automatic incubation setting
• After the machine is started and the temperature and humidity display is normal, it’s possible to select the type of eggs (the egg type for this machine is: chicken, duck, goose, pigeon, blackcock and user-definition (others)).
• Operation procedure: press and hold the “mode” key (for 3 seconds) to enter the chicken egg incubation mode. If it’s necessary to incubate other kinds of eggs, press and hold the “mode” key again (for 3 seconds) to enter the six categories of chicken, duck, goose, pigeon, blackcock and user-definition.
• Press the “mode” key and release the key to check the egg turning times and incubation days; press the “mode” key again to return to set the temperature and humidity state. (Note: after power failure, the egg turning times will be cleared, but the incubation days will be memorized).
Chicken egg incubation days and parameter table
Incubation days | 1 – 6 days | 7-12days | 13-18days | After 19 days |
Temperature parameter | 38.0℃ | 37.8℃ | 37.6℃ | 37.2℃ |
Humidity paramete | 60%RH | 55%RH | 60%RH | 70%RH |
Air exchange parameter | 2(15) | 2(20) | 1.5(25) | 1.5(30) |
Egg turning paramete | 1.5(180) | 1.5(180) | 1.5(180) | No egg turning |
Duck egg incubation days and parameter table
Incubation days | 1 day | 2-3days | 4-20days | 21-25 days | After 26days |
Temperature parameter | 38.3℃ | 38℃ | 37.8℃ | 37.5℃ | 37.2℃ |
Humidity paramete | 60%RH | 60%RH | 55%RH | 65%RH | 70%RH |
Air exchange parameter | 2(15) | 2(20) | 1.5(25) | 1.5(25) | 1.5(30) |
Egg turning paramete | 1.5(180) | 1.5(180) | 1.5(180) | 1.5(180) | No egg turning |
Under user-defined mode, the parameter will not change with timeNote: 1. After one incubation cycle of “chicken, duck, goose, pigeon and blackcock” mode is finished, the system will not be reset automatically and the user could select the mode again, or press and hold the “decrease” and “mode” key for more than 3 seconds to clear the incubation days for second batch of incubation.
2.Under user-defined mode, the temperature, humidity, air exchange, egg turning and parameter could be set manually and the system works according to the parameter setting; under the other five modes (chicken, duck, goose, pigeon and blackcock), the system works according to incubation days in accordance with fixed parameters and the user could not change the setting.
V. User-defined setting:1.Temperature and humidity setting
2.Interval adjustment under user-defined mode (normally not necessary for setting by user, as it’s set before delivery)
VI. Manual egg turningUnder normal operation state, click “increase” key to start turning egg left → stop turning egg left →start turning egg right → stop turning egg right.
VII. Clear alarm manually
VIII. Restore delivery function
Under normal operation state, press and hold “increase” key and “decrease” key together for more than 5 seconds (long pressing), the buzzer will beep to restore the default
No reviews found