FY-30DCI Medical Mobile UV Lamp Trolley
FY-30DCI Medical Mobile UV Lamp Trolley
Specification
Ultraviolet sterilizes car is mainly used in the medical and hygienic units as well as the industrial section of food and medicines for the air sterilization. It can killed MRSA, E.coli, germs and microorganism, etc. Technical Parameter:
| Model.no | Tube Power | Number of tubes | Applicable static area | Voltage | Frequency | Input power | UV wavelength | Irradiance |
| FY-30DCI | 30w x 2 | 2 | ≥30m2 | 220V±10% | 50Hz±10% | 180VA | 253.7nm | ≥214uw/cm2 |
| FY-30DC | 30w x 2 | 2 | ≥30m2 | 220V±10% | 50Hz±10% | 180VA | 253.7nm | ≥214uw/cm2 |
| The tube could be concealed inside,and adjusted to various angles | 30°,60°,90°,135°,180° | |||||||
| It is equipped with the timer,and the timer’s limitation for FY-30DCI | 0-1440 min |
Method of Usage:
1.Install the base with location hole and reed.
2.Open the protection door.
3.Lift the lamp arm and adjust to 90,135,190 degrees.
4.Insert the plug and press ‘ON’ button ,adjust 0-120mins timer.
5.Leave the room right now.
6.After finishing sterilization,press ‘OFF’ button.
7.Adjust timer to ‘OFF’.
8.Hold down the ‘adjustable button 3’ to adjust lamp arm to the box .
9.Close the protection door.
10.Pull out the plug.
Caution:
1.The voltage range should be less than 10%, or will affect the rated life.
2.Double tube structures, the arm of lamp can be adjustable according to the angle.
3.The timer can set the sterilization time, the power will be cut off automatically. Follow the direction instruction.
4.Ensure the surface clean of UV lamp, or will affect the performance.
5.In case of any electricity risk.
6.After using turn off the plug of power.
7.Keep in the dry and clean room.
8.UV illumination less than 70% or more than 2000 hours working should change the lamp
No reviews found
