JSZY-05L Oxygen Concentrator
JSZY-05L Oxygen Concentrator
Specification
1. Software Version V1.0
2. The accessories and exchangeable parts should be replaced when they are damaged or no longer cleaned
3. Working principle PSA (Pressure Swing Adsorption)
4. Oxygen identification Tasteless, colorless, free of combustion-supporting gas.
Input power | 380VA |
Voltage | AC 230V, 50Hz |
Oxygen concentrating | ≥ 90% |
Oxygen flowunder ATPD (ambient temperature and pressure, dry) | 0.6L/Min.~5L/Min |
Outlet pressure | 40kPa |
Working noise | ≤60dB(A) |
Alarm noise level | ≤85dB(A) |
Environmental condition | 5℃~40℃ |
Relative humidity | ≤80% |
Atmospheric pressure | 86kpa~106kpa |
Electrical requirements | BF type, Class II equipment |
Working environment requirement | No corrosive gas and strong magnetic field around |
ATTENTION | Beyond above-mentioned condition may affect product‘s working. If the temperature is below 5℃, please do not use it until putting it at room temperature over 4H |
Requirement for transportation and storage Environmental condition | -40℃~55℃ |
Relative humidity | ≤80% |
No se encontraron opiniones