Powerful Double Exhaust Multifunctional Forensic Anatomy Table DGER-200B
Powerful Double Exhaust Multifunctional Forensic Anatomy Table DGER-200B
Main function
- The arc-shaped connection in the table top is not easy to scale and is easy to clean and disinfect
- The table is equipped with 3 sieve isolation plates, which can be disassembled and assembled for washing and disinfection
- There is a hair isolator in the pool to prevent hair from entering the drainage pipe and blocking
- Equipped with heat and cold regulator, induction manual faucet (need to connect water heater)
- The water pressure of the mobile spray and flushing gun can be adjusted to flush the entire dissection table.
- There are water curtain devices on both sides of the table to automatically wash the dirt on the surface of the dead body (the dead body can be defrosted)
- The crusher under the pool can crush the dissected tissues and discharge them through the drain
- The moving plate above the table can be used for organ placement during anatomy (optional)
- Negative pressure air extraction system: The upper air extraction adopts the method of inclined air outlets on both sides of the inner side of the table, and the lower air extraction adopts the openings around the base to suck in, which can drain harmful gases leaked during the dissection process in time (need to connect to an external air extraction system)
- There is leakage protection and waterproof socket 220V.50HZ on the side of the table.
Specification
Material | high-quality 304 stainless steel cold-rolled steel |
Surface hardness | HV200 |
Bending | 180 |
Stretching | TensileTestTs/nmm2min520 |
Thickness | 1.5mm of the countertop steel plate, the remaining thickness of 1.2mm |
Load | ≥150kg |
Product Size | length 2600*width 850*height 850mm fixed type |
Packing Size/G.W | 2800*1050*1050mm/220kg |
No se encontraron opiniones