FY-30DS Medical Mobile UV Lamp Trolley
FY-30DS Medical Mobile UV Lamp Trolley
Specification
This product is made of carbon steel, with its double-tube structures, but also can be used independently. Technical Parameters:
Model.no | Tube Power | Number of tubes | Applicable static area | Voltage | Frequency | Input power | UV wavelength | Irradiance |
FY-30DSI | 30w x 2 | 2 | ≥30m2 | 220V±10% | 50Hz±10% | 180VA | 253.7nm | ≥214uw/cm2 |
FY-30DS | 30w x 2 | 2 | ≥30m2 | 220V±10% | 50Hz±10% | 180VA | 253.7nm | ≥214uw/cm2 |
The tube could be concealed inside,and adjusted to various angles | 30°,60°,90°,135°,180° | |||||||
It is equipped with the timer,and the timer’s limitation for FY-30DS | 0-120 min |
Method of Usage:
1.Install the base with location hole and reed.
2.Open the protection door.
3.Lift the lamp arm and adjust to 90,135,190 degrees.
4.Insert the plug and press ‘ON’ button ,adjust 0-120mins timer.
5.Leave the room right now.
6.After finishing sterilization,press ‘OFF’ button.
7.Adjust timer to ‘OFF’.
8.Hold down the ‘adjustable button 3’ to adjust lamp arm to the box .
9.Close the protection door.
10.Pull out the plug.
No reviews found