Lower limb rehabilitation exercise device XY-CMP-IIB

I.Principle of treatment

The device adopts a microcomputer digital control design, LCD liquid crystal display, and a micromotor to drive the lower limb support, which drives the patient to perform lower limb joint function recovery training.

II.Technical Parameters

1. Power supply: AC 220V ±22V, 50Hz ±1Hz;

2. Rated input power: 60VA;

3. The adjustable range of thigh support length is 0～260mm, and the tolerance is ±10%;

4. The adjustable range of calf support length is 0～260mm, and the tolerance is ±10%;

5. The maximum adjustment range of the extension angle is 0～120°; the maximum adjustment range of the flexion angle is 0～125°, the level difference is 3°, of which the level difference of 123°～125° is 2°, when the angle is not more than 50°, the tolerance is ±5° ; When the angle is greater than 50°, the tolerance is ±10%;

6. The angular operating speed is adjustable in 8 levels, the minimum angular velocity is 1.5°/s, and the maximum angular velocity is 3.6°/s. Grade difference 0.3°/s, tolerance ±20%;

7. The training time is adjustable from 0 to 240min, the level difference is 10min, the tolerance is ±10%, and there will be a beep at the end of the time;

8. Move the foot pedal to the leftmost position and the rightmost position, the center line included angle is 60°, and the tolerance is ±10°;

9. The activity meter is equipped with a wire control switch, which is safe and reliable;

10. Movement angle, speed and time are all digitally controlled;

11. LCD backlit screen liquid crystal display, clear data;

12. Equipment function: rehabilitation training for lower limb joints (hip, knee, ankle) dysfunction.

III. Product advantages

1. The maximum adjustment range of the extension angle is 0～120°; the maximum adjustment range of the flexion angle is 0～125°, the level difference is 3°, of which the level difference of 123°～125° is 2°, when the angle is not more than 50°, the tolerance is ±5° ; When the angle is greater than 50°, the tolerance is ±10%;

2. The angular operating speed is adjustable in 8 levels, the minimum angular velocity is 1.5°/s, and the maximum angular velocity is 3.6°/s. Grade difference 0.3°/s, tolerance ±20%;

3. Move the pedal to the leftmost position and the rightmost position, the center line included angle is 60°, and the tolerance is ±10°.

IV. Indications

   It is suitable for rehabilitation training of lower limb joints (hip, knee, ankle) dysfunction.