Stretcher truck AG-HS029

Stretcher truck AG-HS029

Basic functions: 

 1. Specification: total length 1930mm, full width 770mm, height lifting 510-850mm, back lifting 0-70 °.

 2. Safe working load: 170KG 

 3. Back lifting system: The back lifting is controlled by a silent gas spring. 

 4. Height adjustment: Metal rocker system with overload protection function, not easy to break.

 5. Bedboard: PE resin molded products.

 6. Frame: Made of welded steel products. 

 7. Guardrail: PE resin formed guardrail plates on both sides, with a height of ≥ 340mm and an effective protective height of ≥ 340mm, making patients safer. The guardrail is installed on two iron plates vertically welded to the bed body through step screws, providing better strength while ensuring smooth movement. 

 8. The guardrail adopts a new type of safety guardrail design, and the buckle of the guardrail is fixed by a 9mm thick lock. When the inside of the guardrail is affected, it cannot be opened, and the guardrail can be opened from the outside to the inside, effectively preventing patients from operating from the inside, leading to bed accidents, with better strength and safety; 

 9. There are small holes on each corner of the four guardrails that can be used to hang drainage bags. 

 10. Castors: Double sided anti winding function casters with central locking, preventing hair and other debris from entering the interior of the casters and causing push failures. The internal steel bracket has a double bearing cylindrical structure, with a large load capacity and strong anti collision and anti side force effect. There are four 150mm diameter casters, and a foot brake control system is installed on the foot side of the bed body, with one foot braking and the four wheels fixed at the same time.

 11. The central control brake linkage rod is formed with an integrated circular tube to ensure higher strength. 

 12. Independent central fifth wheel system: The fifth wheel control pedals are installed on both sides of the cart, and the central fifth wheel moves freely when retracted; 

 13. Tray: There is a two-stage injection molded tray under the bed, which is divided into two parts with different sizes and depths. It is equipped with 6 water leakage holes, making it easy to use and can bear a weight of 10Kg. 

 14. Infusion rack storage rack: There is an infusion rack storage rack located at the bottom of the back plate, which can be fixed for storage when not in use. The infusion rack storage rack also has a plastic sleeve inside to prevent collision and shaking of the infusion rack. 

 15. Oxygen tank shelf: A Oxygen tank with a maximum of 7 liters can be placed horizontally under the bed board, and two knobs can be used to fix it.

 16. Mattress: PU waterproof treatment on the surface of the fabric, easy to clean, with a thickness of 5cm, making it more comfortable for patients to lie down during gastroscopy. 

 17. Stainless steel hooks: There are four stainless steel metal hooks on the side of the bed, fixed with stainless steel rivets for better strength and aesthetics. 

 18. The bed frame is made of 30 * 60 * 1.5mm square tube U-shaped bending and vertical welding, with better strength and stable implementation. 

 19. Infusion stand socket: There are infusion stand sockets on all four sides of the bed, which can be rotated to place the infusion stand when in use. When not in use, it can be rotated and stored under the bed. There is a plastic sleeve inside the infusion stand socket to prevent collision, making it more beautiful and convenient to use.

193*77*60cm 117kg