WRA I(A) Multi-Function Electric Bed

WRA I(A) Multi-Function Electric Bed

Ideal features for ICU

From the clinical needs, the design and function of the WRA I A intensive care bed fully meet the higher requirements of modern ICU for intensive care. This modern bed features a motorized column structure that provides a comprehensive solution for healthcare professionals to claim critical patients.

Features

1. Two-column motors design secures the access for the image intensifier
2. Four bumpers corners locating
3. Electrostatic finishing for steel ensures the long time usage of the beds.
4. Four sections design(Back, seat, thigh, shank)offers the best and practical positions for the patients
5. 150mm 360 degrees castors guarantee the convenient movements
6. Central brake system
7. Retractable side rail design gives the best convenience both to the patients and hospital personnel.
8. In-bed scales: The weighing system indicates the absolute value of the patient's body mass(without the effect of the bed), and the system enables accessories to be added or removed without changing the weight of the patient.

Support for vital functions

Thanks to the one-button function of the WRI A bed hospital staff can effectively care for the well-being of two of the most important organs: the heart and lungs. In the cardiac chair position, the bed supports respiratory and cardiovascular systems.

Cardiac chair

The cardiac chair position helps to maximize respiratory function and the sitting position also enhances patient comfort when reading, eating, or watching television.
♦ Staff may comfortably adjust the position of the cardiac chair with one touch of a single button in the supervisor control panel.
♦ The"Automatic compound fallback" system extends the mattress platform in the pelvic area and reduces the pressure load on the tissues in this region when a patient is positioned in the cardiac chair position.

Falls prevention

Three-section siderails-complete protection
The unique siderail system of the WRA l creates a safe area on the bed.
Staff can optimize siderail use according to the individual medical condition of the patient.
♦ If the patient is at high risk for falls, the nurse may set the side rails to span the entire length of the mattress platform.
♦ WRA I provides a protective barrier all around the mattress platform.
This may prevent confused or high-risk patients from falling.

Active parts

For enhanced falls prevention Besides the mechanical solutions, WAR l offers other progressive methods of minimizing the fall risk. To achieve the highest patient safety level, the bed can be equipped with other sophisticated features as well.

Bed exit alarm

Multi-zone bed exit alarm monitors the patient's presence and movements in bed and alerts the staff to potential fall risk.

IN BED X-RAY IMAGING

X-ray examination of a critically ill patient is part of the daily routine for intensive care units. Frequent lung and chest X-ray monitoring can prevent life-threatening complications. In-bed X-ray imaging serves both the patient who does not have to be moved unnecessarily and the staff through reducing patient handling

The integrated X-ray cassette holder

The backrest of the WRI A is radio translucent, and a holder for an X-ray cassette is fixed beneath it. The holder's sliding construction allows the cassette to be conveniently inserted under the mattress platform from the side of the bed.

C-arm compatibility

The WRI A bed allows certain C-arm- assisted cardio-surgical operations to be performed directly on the bed thanks to the radio translucent mattress platform (from the pelvic area to the head of the bed).
♦ The column construction allows for the unrestricted accessibility of the C-arm.

Infection control

The core of effective nosocomial infection prevention is perfect hy- giene and the disinfection of all surfaces in a ward, including the bed. Easy decontamination of the WRAl bed is guaranteed due to the simple structure and use of joint-free technology.

Column construction

The column construction of the bed is the foundation of easier hygiene. The sealed columns consist of smooth aluminum profiles without any difficult-to-clean gaps and joints. The structure allows unrestricted access to all surfaces of the bed.

Stop Pressures Ulcers

The bed is equipped with the "Automatic compound fallback design" which extends the mattress platform in the pelvic area and reduces the pressure load on the tissues in this region.
♦ This unique solution delivers maximum patient comfort in all positions.
♦ The system also reduces friction and shearing forces between the mattress and the patient's skin which contributes to the prevention of pressure ulcers.

Bed with"Automaticcompound fallback design"

♦ Easier breathing
♦ Less friction and shearing forces
♦ Enhanced comfort in the abdominal area
♦ Minimised patient migration to the foot section
♦ Better support of the head

Standard Bed

Most-affected areas by extensive pres-sure and shearing forces

Controls Ssystem

The set of controls allows nurses to operate the WRAl bed effectively and comfortably.
Patients can control the basic functions which contribute to their independence and physical welfare.

Siderails control

The basic functions control is located in the siderail so it is easily accessible by the patient.

Supervisor Panel

The shape of the panel is ergonomically designed and the clear graphics are user-friendly. The electric operations also include five pre-programmed functions-emergency Trendelenburg position, cardiac chair position, examination position, emergency stop, and CPR.

Patient handset

The practical patient and nurse handset contains the basic bed controls including the backrest tilt/knee rest tilt/Trendelenburg/reverse trendelenburg and mattress platform height adjustment. All functions can be locked out from the supervisor panel.

1. Constant height of head-end
The head end fixed to the chassis enables quick and easy access to the patient's head neck and thorax
2. Segmented Side Rail
Provide safety protection to prevent patients from falling and support patients to freely move.
3. Integrated Weighing System
The bed weighing system control panel, located under the bed panel, is uniquely designed to prevent impact.
4. Mattress Platform
The Mattress platform is made of HDPE which can be easily removable and easy for sterilization. The mattress platform can so X-ray for the backboard and offer the patient more comfortable.
5. Automatic compound  fallback design
The removable bed ends can be locked to prevent their according to ergonomics to prevent decubitus, increase comfort and maintain good lung ventilation.
6. Nurse Control Panel
Adjust all positions of the bed, including various common body positions, "START" safety start button, "STOP" button, "CPR" cardiopulmonary resuscitation quick-release button
7. Columns
Electric lifting units in two columns enable adjustment of the mattress platform height and change to other positions. The column structure ensures that the bed is perfectly stable
8. Side Rail Control Panel
It is convenient for patients to adjust some basic functions of the bed and increase its uniqueness
9. Bed extension
The integrated bed extension adjusts the mattress platform length to the individual heights of patients
10. Linen shelf
The linen shelf also stores the Supervisor panel
11. Lockable bed ends
The removable bed ends can be locked to prevent their  accidental removal when steering or handling the bed
12. Integrated X-ray cassette holder
The holder sliding construction allows the cassette to be conveniently inserted under the mattress platform  from the side of the bed