Taurus 12.1" Multi-Parameter Patient Monitor

Taurus 12.1" Multi-Parameter Patient Monitor

Specification

Configuration

ECG+SpO2+NIBP+2TEMP+PR+RESP, Li-ion battery

Optional

Masimo/Nellcor SpO2, EtCO2, C.O, 2-IBP, AG, BIS,NMT, Thermal recorder

12.1” color TFT LCD Touch screen

8 waveform display,up to 12-lead ECG analysis

Powerful calculation(Hemodynamic,Dose,Oxygenation,Ventilation)

Pacemaker detection

ST & arrhythmia analysis

OxyCRGs

BIS module, NMTmodule optional

Wired/Wireless CMS, support HL7 protocol to HIS

SpO2 pulse-tone modulation (Pitch Tone)

MEWS(Modified Early Warning Score)

Graphical & tabular trend review( 120 hours)

48h full disclosure wave review for each patient

Specifications

Physical Specification

Display

12.1” TFT Touch screen

Resolution: 800 x 600 (1024 x 768 optional)

Number of traces: 8, up to 12 ECG waveforms

Dimension: 310×292×174mm(W×H×D)

Weight: < 5 kg under standard configuration

LAN: 1 standard RJ45 port

WLAN:IEEE 802.11b/g/n

USB: 2 USB connectors

HDMI: 1 HDMI monitor connnector

Output:1 connector for Nurse call,Defib Sync Analog Output

ECG

Lead type :3-lead,5-lead,12-lead(optional)

ECG waveform:2 channels,7 channels, 12 channels

Display sensitivity:

2.5mm/mV (×0.25), 5mm/mV (×0.5), 10mm/mV (×1.0),

20mm/mV (×2.0)

Wave sweep speed:

3.125mm/s, 6.25mm/s, 12.5 mm/s, 25 mm/s, 50 mm/s

Bandwidth

 Diagnostic mode: 0.05Hz~100Hz

 Monitor mode: 0.5Hz~40Hz

 Surgery mode: 1Hz~20Hz

 Strong filter mode: 5Hz~20Hz

CMRR>100dB

Notch: 50/60Hz notch filter can be set to on or off

Differential input impedance>5MΩ

Electrode polarization voltage range: ±400mV

HR range: 15 - 350 bpm

ST Measurement Range: -1.0 - +10 mv

Baseline recovery time<3s after defibrillation (in monitor and surgery mode)

Calibration signal:1mV (peak - peak), accuracy ±3%

TEMP

Accuracy: ±0.1℃ or ±0.2℃ °F（without probe）

Measurement range: 0~50℃

Channel：Two channels

Resolution: 0.1℃

Parameters：T1,T2 and TD

RESP

Measurement method : Thoracic electrical bioimpedance

Operation modes: Auto/Manual

Measuring lead: Lead I, II

Measurement range: Adult:0~120 bmp;

 Neonate/Pediatric:0~150bpm

Resolution: 1 bpm

Apnea alarm delay:10s,15s,20s,25s,30s,35s,40s

Apnea alarm: Selectable

Wave gain: ×0.25, ×0.5, ×1, ×2

Respiratory impedance range: 0.5-5Ω

Baseline impedance: 500-4000Ω

Gain: 10 grades

Scan speed: 3.125mm/s, 6.25mm/s, 12.5 mm/s, 25mm/s

Pulse Rate

Range: 30~300 bpm

Resolution: 1bpm

Accuracy: ±3bpm (non-motion)

 ±5bpm (motion)

Refreshing rate: 1s

NIBP

Measurement method : Automatic oscillometric method

Operating mode:Manual, automatic, continuous

Measurement unit: mmHg/kPa selectable

Typical measurement time: 20~40s

Measurement type: Systolic, Diastolic,Mean

Measurement range (mmHg)

Range of Systolic pressure: Adult 40-280

 Pediatric 40-200

 Neonatal 40-135

Range of Diastolic pressure: Adult 10-210

 Pediatric 10-150

 Neonatal 10-95

Range of Mean pressure: Adult 20-230

 Pediatric 20-165

 Neonatal 20-105

Measurement accuracy

Maximum average error: ±5mmHg

Maximum standard deviation: 8mmHg

Resolution: 1mmHg

Interval:1,2,3,4,5,10,15,30,60,90,120,180,240,480minutes

Overpressure protection: Software and hardware,

 double safety protection

Cuff pressure range: 0-300mmHg

SpO2 (Northern )

Measurement range : 0-100%

Parameter monitoring: Perfusion Index(PI)

 Pleth Variability Index(PVI)

Resolution: 1%

Accuracy: ±2% or ±2bpm

Refreshing Rate: 1s

Pleth wave speed: 3.125mm/s, 6.25mm/s, 12.5 mm/s, 25mm/s

Masimo SpO2 (optional)

Measurement range : 0-100%

Resolution: 1%

Accuracy: ±2%（70-100%， Adult/Pediatric,non-motion,low

 perfusion);

 ±3%（70-100%， Neonate,non-motion);

 ±3%（70-100%， motion);

 0-69%,unspecified

Refreshing Rate: 1s

C.O.(optional)

Method: Thermodilution

Range: C.O.: 0.2 to 20 L/min

TB: 23 to 45 ℃

T1: -1 to 27℃

Accuracy:C.O.:±5% or ±0.1L/min，whichever is greater

TB,T1：±0.5℃ (without sensor）

IBP(optional)

Channel:2-channel or 4-channel

ART: 0 to 300 mmHg

PA: -6 to 120 mmHg

CVP/RAP/LAP/ICP : -10 to 40 mmHg

Measurement range: P1/P2 -50 to 300 mmHg

Resolution:1mmHg

Accuracy:

±2% or ±1mmHg, whichever is greater(without sensor)

Sensitivity: 5uV/mmHg/V

Impedance range: 300 to 3000Ω

Masimo ISATM Sidestream CO2 (optional)

Warm-up time: Full accuracy within 10 seconds

Sampling flow rate: 50ml/min(+/-10/min)

Accuracy: 0~15% (±0.2% of the reading)

 15~25%, unspecified

Measurement Range: 0 -25%

Rise time: 200ms,typical at 50ml/min flow rate

Total response time:

 within 3 seconds(with 2m Momoline sampling line)

AWRR Range: 0~150bpm

Masimo IRMATM Mainstream CO2 (optional)

Measurement Range: 0 -25%

Warm-up time: Full accuracy within 10 seconds

Accuracy: 0~15% (±0.2% of the reading)

 15~25%, unspecified

AWRR Range: 0-150bpm

Masimo Multi-gas ISA OR+/IRMA AX+ CO2 (optional)

Gas:CO2,N2O,HAL,ISO,ENF,SEV,DES with automatic identification

Warm-up time: Full accuracy within 20 seconds for IRMA AX+

CO2 Accuracy: 0-10%:±(0.2%+2% of the reading)

 0-15%:±(0.3%+2% of the reading)

N2O Accuracy:0-100%:±(2%+2% of the reading)

HAL,ISO,ENF:0-8%:±(0.15%+5% of the reading)

SEV:0-10%:±(0.15%+5% of the reading)

DES:0-22%:±(0.15%+5% of the reading)

Agent identification time:＜20s(typical＜10s)

AWRR range:0-150bpm

AWRR accuracy:+/-1bpm

Apnea time:20-60s

Recorder(optional)

Built-in,Thermal dot array

Horizontal resolution :16 dots/mm (25 mm/s paper speed)

Vertical resolution:8 dots/mm

Paper speed: 12.5mm/s, 25 mm/s, 50 mm/s

Number of waveform channels: 3

Operation Environment

Power: AC 100-250V, 50/60Hz

Temperature: 5-40℃

Humidity: ＜80%

Patient Range: Adult, Pediatric, Neonate